|
مجله دانشگاه علوم پزشکی بابل، جلد ۱۹، شماره ۱۲، صفحات ۰-۰
|
|
|
عنوان فارسی |
اثر کلرهگزیدین ۲% بر ریزنشت مینایی ترمیمهای کامپوزیتی با استفاده از باندینگهای عاجی نسل ۵، ۶، ۷ و یونیورسال ( در آزمایشگاه) |
|
چکیده فارسی مقاله |
سابقه و هدف: ماتریکس متالو پروتئیناز در ثبات باند کامپوزیت به دندان نقش مهمی دارد. در سالهای اخیر کلرهگزیدین به عنوان مهارکننده فعالیت ماتریکس متالو پروتئیناز پیشنهاد شده است. هدف از این مطالعه بررسی اثر کلرهگزیدین 2% بر ریزنشت مینایی ترمیمهای کامپوزیتی در سیستمهای باندینگ مختلف می باشد. مواد و روشها: در این مطالعه آزمایشگاهی، حفرات کلاس V در سطح باکال و لینگوال 40 دندان مولر کشیده شده تهیه شد. حفرات اچ (Etch) شدند و به صورت اتفاقی به 8 گروه Adper single Bond 2 (ASB)، Clearfil SE Bond (CSE)، Clearfil S3 Bond (CS3)، Single Bond Universal (SBU)، ASB +کلرهگزیدین2%، +CSEکلرهگزیدین 2%، +CS3کلرهگزیدین 2%، +SBUکلرهگزیدین 2% بعد از آن حفرات با کامپوزیت 250Z ترمیم شدند و ترموسیکلینگ ( بین 5 تا 55 درجه سلسیوس،5000 سیکل) انجام شد. جهت اندازه گیری میکرولیکیج مینایی، از روش نفوذ رنگ استفاده شد. نمونه ها باکولینگوالی تحت برش قرار گرفتند و ریزنشت در استریومیکروکوپ با بزرگنمایی 40 با سیستم کدبندی 3-0 ثبت و آنالیز شد. یافته ها: در سیستم های باندینگ ASB, CSE, CS3 , SBU در صد نمونه های بدون ریزنشت قبل از کاربرد کلرهگزیدین به ترتیب 80%، 90%، 90% و 80% و بعد از آن 100%، 80%، 80% و 90% بود اما این اختلاف معنی دار نبود. نتیجه گیری: نتایج مطالعه نشان داد که کاربرد کلرهگزیدین 2% بر ریزنشت مینایی ترمیمهای کامپوزیتی در سیستمهای باندینگ مختلف اثر منفی ندارد. |
|
کلیدواژههای فارسی مقاله |
کلرهگزیدین، عوامل باندینگ، نشت |
|
عنوان انگلیسی |
Effect of 2% chlorhexidine on the enamel microleakage of composite restorations using 5th, 6th, 7th and universal generation of dentine bonding agents (in vitro) |
|
چکیده انگلیسی مقاله |
Background and objectives: The matrix metalloproteinase plays a significant role in the bonding stability of the composite-tooth. Chlorhexidine has been offered as matrix metalloproteinase inhibitor in current years. The aim of this study was to investigation of effect of 2% chlorhexidine on enamel microleakage of composite fillings in different bonding systems. Methods: In this in vitro study, class V cavities were prepared on the lingual and buccal surface of forty extracted molar teeth. The cavities were etched and divided randomly to 8 groups: 1: Adper single Bond 2 (ASB), 2: Clearfil SE Bond (CSE), 3: Clearfil S3 Bond (CS3), 4: Single Bond Universal (SBU), 5: ASB + 2% Chlorhexidine (CHX), 6: CSE + 2%CHX, 7: CS3 +2% CHX, 8: SBU + 2%CHX. After bonding application, the cavities were restored with Z250 composite and thermocycling procedure (5 to 55 C, 5000 cycles) was done. Enamel microleakage was measured by dye penetration test. The teeth were sectioned buccolingually and microleakage was recorded based on a 0‒3 scoring system under a stereomicroscope (Motic Micro Optic, industrial group Co, LTD, Japan) at 40x magnification. Data analysis was done. Results: In ASB, CSE, CS3 and SBU bonding systems, Percent of samples without microleakage before use CHX was 80%, 90%, 90%and 80% and after it was 100%, 80%, 80% and 90 % respectively. Conclusion: Use of 2% chlorhexidine has not adverse effect on enamel microleakage of composite restorations in different bonding systems. |
|
کلیدواژههای انگلیسی مقاله |
Chlorhexidine, Bonding agents, leakage |
|
نویسندگان مقاله |
محمدامین حیدری گرجی | ma haidari
فایزه ابوالقاسم زاده | f abolghasemzade
همایون علاقه مند | h alaghemand
بهناز اسماعیلی | b esmaeili
|
|
نشانی اینترنتی |
http://jbums.org/browse.php?a_code=A-10-897-3&slc_lang=fa&sid=fa |
فایل مقاله |
فایلی برای مقاله ذخیره نشده است |
کد مقاله (doi) |
|
زبان مقاله منتشر شده |
fa |
موضوعات مقاله منتشر شده |
دندانپزشکی ترمیمی |
نوع مقاله منتشر شده |
تحلیلی |
|
|
برگشت به:
صفحه اول پایگاه |
نسخه مرتبط |
نشریه مرتبط |
فهرست نشریات
|